We cooperate with Irobert vacuum cleaner for shell production and assembly.
The assembly process of the vacuum cleaner consists of several key steps:
1. Component check: Verify that all components are complete, including the battery, main motor, drive wheel, roller brush, suction port, shell, sensor, and mainboard.
2. Motor and drive system installation: Install the main motor into the body, install the drive wheel and related drive system.
3. Circuit connection: Connect the motherboard, sensors, switches, etc., to the battery and drive system to ensure that the electrical connection is correct.
4. Install the sensor and control module
Install edge sensors, obstacle sensors, etc
Control board connection: Ensure that the main control board is connected to the motor, sensor and battery to complete the overall circuit access.
5. Shell assembly
Install the housing components on the body, and secure the operation keys and indicators to the appropriate position to ensure normal operation by the user.
6. Test and debug
Power-on test: check battery charging, sensor response, cleaning effect, etc.
Motion test: ensure that the drive wheel and rolling brush work properly, and the sweeper can run smoothly and clean the ground.
Intelligent system test: confirm that the intelligent system of the sweeping machine (such as automatic recharge, obstacle avoidance function) can work normally.
7. Final inspection and packaging
Check appearance and function: Make sure the shell is intact and all functions are working properly.
Cleaning and packaging: Clean the surface of the machine, perform a final quality check and pack it in preparation for shipment.
